+84 (0) 896 683 896
Edgecam Waveform Turning
Edgecam Waveform Turning on a DMG Mori CTX1250
Material : St St 316
Tool : Seco 6mm Button Tool C6FIRMDT Jetstream
Cutting Speed Vc (m/min) : 255
Feed Rate Fn (rev/min) : 0.6
Depth of Cut Ap (mm) : 1.2
Cycle Time (mins) : 2.33
Material : St St 316
Tool : Seco 6mm Button Tool C6FIRMDT Jetstream
Cutting Speed Vc (m/min) : 255
Feed Rate Fn (rev/min) : 0.6
Depth of Cut Ap (mm) : 1.2
Cycle Time (mins) : 2.33
